The first assignment’s lessons planned out and timing of delivery of the other two. Written in a SOW format. Could be used as lesson plans (depending what you and your centre require). :-)

Student (and teacher!) friendly assignment checklists for the first 2 assignments of Unit 18 (Industrial Chemical Reactions) in the Level 3 Applied Science. I have created these using my own interpretations of the brief and teacher guidance. Useful for teacher as can help speed up the marking process.

This is a lab book for unit 2 that will help students greatly once assignments are issued. Students can record their results in here during/after the practicals, either handwritten on a printed version or typed on an online copy. This saves loads of time with planning lessons :-) I hope that you find it helpful.

A student-friendly checklist that is not overwhelming. This was created for Unit 6 Investigative Project Assignments A, B and C/D. These are preliminary checklists to get students started and on the right track. Checklist for P, M and D criteria for assignment A and just P criteria for assignments B and C/D. I have also made 2 short summary videos which may be helpful for students or new teachers; one is an intro to what Unit 6 is about https://www.youtube.com/watch?v=3gVKhB_3jiM and the other is aimed at students and explains how to get started with the literature review in assignment A. https://www.youtube.com/watch?v=7r-dWTxqI9M Audit and action plan template also included, along with a suggested structure for the project proposal.

A PowerPoint lesson for Unit 4 assignment B preparation of an organic liquid. Includes lesson plan, helpful videos, pre-practical questions and starter activity worksheets (with teacher answers). I was observed in this lesson and obtained good feedback. Includes a worksheet to assist with ideas and a starting point for research tasks/discussion around P4. Other details: While students are refluxing for 30min, you could get them to look up literature values for the boiling point of the ester (so they know the temperature it should come out at during distillation) and research factors that affect purity and the effect that impurities will have on the boiling point. What are possible impurities and where may they come from etc. If you have efficient, confident students, this full lesson with the 3 stage practical including activities will take 3 hours. If your students are less confident, I recommend 4 hours. **note - **recommended videos included are from the RSC written lesson plan is mine, however the template is from ‘teacher toolkit’ :)

Sample results for practical-based assignments A, B and C for Unit 2 Practical Scientific Procedures and Techniques. Includes results for calibration of 3 pieces of equipment, 2x titrations (one using indicator, one using a pH probe) and colorimetry for assignment A. For assignment B includes results for calibration of a glass and digital thermometer in hot and cold water and cooling of both stearic acid and paraffin wax. supporting videos for assignments: A plotting and annotating pH curve: https://youtu.be/mgNhkUipZw0 Plotting and annotating colorimetry curve: https://youtu.be/IXXOmPygKXY Writing chemical foon a computer: B plotting cooling curves: https://youtu.be/92zysOBqKP8 Finding and referencing a literature value: https://youtu.be/b4jkipDtO9k Drawing a tangent to a curve: https://youtu.be/Ne-cxsjHPIM Includes amino acid and plant chromatography for assignment C. Note amino acid was paper chromatography and basil was used for the plant chromatography, which was thin layer chromatography. Solvents used for chromatography were as follows: For the amino acid chromatography we used a mixture of solvents in the following ratio: butanol, water and ethanoic acid in 4:2:1, respectively. For the plant chromatography we used a mixture of solvents again, in the following ratio: cyclohexane, acetone and petroleum ether in 5:3:2.

Attached is a full lesson 5 page worksheet containing a detailed step-by-step method (including how to use the UV-vis), introduction including theory on Beer’s Law, space for students to tabulate and record their results, questions around the topic, answers and sample results. There are a couple of photographs (taken by me when I was trialling this) to help students visualise how things should look when they are carrying out the method. This can take around 1 hour - 2.5 hour lesson depending on equipment availability and how you wish to deliver it. :-) Please leave a review!

A resource created to assist teachers and students with delivery of the A2 OCR Chemistry PAGs. A PowerPoint to help you structure the beginning of the PAG lesson on 10.2 thiosulfate and acid. Can easily be amended and used as a template if preferred. Alternatively, this could be given to students as a guideline to assist them with their planning and calculations. Example results and graph for thiosulfate (part 1) included, showing the first order relationship. Possible extension opportunities include monitoring how temperature affects the rate of reaction - an Arrhenius plot could then be done as part of the analysis. Recommended for A-A* students. Gives students a checklist of what needs to be submitted. PowerPoint for PAG 9.3 rates attached also. This one includes OCR past paper questions (and answers) at the end as a plenary.

Attached is a full introductory lesson created for the new BTEC Unit 7: Contemporary Scientific Issues. It is activity based, with instructions and answers, a recent case study to get students started, points for discussion, a video on the case study, explanation of terms ethical, environmental, social and economic along with reliability and validity. Gets students thinking about reliability of sources, bias, etc. Homeworks during the first few months of teaching (and tutorial sessions, if you have these) could include watching documentaries on scientific issues to broaden student’s knowledge of contemporary issues in general. You may wish to select these yourself (from Netflix, Youtube etc.) or ask the students to find 1 each for homework and bring to next lesson (to minimise your workload!) then you can decide which to watch as a class and use as a point for discussion etc. Link to video introducing Unit 7: https://www.youtube.com/watch?v=AMFkvxYIVfU

Includes: student worksheet with space to include results, readings and observations for each of the 3 stages, clearly labelled. 3 stage method, teacher and technician notes structured calculations and answers.

Suitable for all exam boards.

These sheets were created for a class that fell behind and were struggling with unit 4. 2 fool-proof sheets for B and C handy for when students need to finish asap

This includes a mini selection of resources including a crossword on learning aim G (fuels), an independent task where students can get on with preparing presentations on the hazards of fuels (has a checklist, 4 choices of what to present on and is differentiated), a results table including structured calculations and report template, a glossary which can be used throughout and added to each time a new key term is introduced and a scientific investigation card sort (which can be used at the beginning as part of the introduction to the unit).

Designed for Unit 2 Practical Scientific Procedures & Techiques L3 Applied Science. Lesson activity for part of Assignment A teaching and completed ‘5 min lesson plan’ Credit to ‘teacher toolkit’ for the format of the lesson plan.

This resource is a lesson created for A2 Chemistry OCR syllabus which covers Bronsted - Lowry acids and bases, conjugate acid-base pairs, mono, di and tribasic acids, neutralisation reactions with acid: carbonates, metal oxides and alkalis. Includes theory, is interactive and has questions and answers. It has step-by-step guides to calculations and refers to OCR Chemistry textbook (states page numbers of summary questions to complete at end of teaching a mini-topic). Watch me teach the basics of part this topic at ‘PhysChem with Liz’ on YouTube: weak acids (calculations): strong acids (calculations): https://youtu.be/NTEa1sBThRg

A powerpoint presentation (consisting of activities and answers and a link to the RSC video on NMR) and worksheet (comic strip to help students condense information and remember the main points of NMR) to assist teaching with the new L3 Applied Science Unit 19. This was created to help teach NMR spectroscopy. It has activities throughout and is step-by-step, I have simplified where possible. Has a couple of extension/early finishers activities in. I have created a series of 3 videos in which I teach NMR, the first can be found here and is about chemical equivalency :) https://www.youtube.com/watch?v=-fWA108hr8M

The new year is a time when many people set resolutions or ‘intentions’, however, these can be set at any time in the year and are beneficial towards our personal growth. Inside this short booklet are ideas of intentions (what habits/things do you want to create or release?) and how to go about choosing them positively (i.e. avoid negatives such as losing weight, how about 'eating healthier foods 70% of the time?) There are also prompts and ideas for starting your own gratitude journal and plenty of things to complete to get you thinking, including how we can view our challenges in a positive light - what can we learn from them? This booklet can be easily adapted if you wish to use it with a class, assembly, project, colleagues etc.

Mixed past paper questions on moles from OCR A past papers which are readily available on past paper finder (still suitable for use for those studying other exam boards). Suitable for both AS and A2 students. #ASmoles #ALevelmoles #moleschemistryALevel

Action plan template. Good for student interventions, tutorial activity for time management or own personal use.

Mixed past paper questions on these topics from OCR A which are readily available on past paper finder (still suitable for use for those studying other exam boards). Suitable for AS students. #enthalpy #ratesofreaction #ASChemistryrevision