A silly one off lesson which takes around an hour. Works well for induction sessions. Lesson starts off with a deadpan question about if students saw the news? What follows are some slides to support a highly spurious tale about rockets being fired from the Isle of White into deep space, supported by some faked newspaper articles about aliens. It all comes down to a meeting is needed, and it will be in the O2 arena (The Millenium Dome as it’s visible from space), but what will they sit on? How do you design a chair for a creature you’ve never met? The lesson is designed to encourage interaction within groups of students who don’t know each other, and also raises some questions about user centered design. Pairs / Groups then present their ideas (with good evidence about where the tail goes). It lasts about an hour, brings a smile to the face, and engages students. Included is a powerpoint (and a pdf version too). There is no lesson plan, it somewhat ‘runs itself’ from the powerpoint.

This resource is a 7 week module of 2 hour lessons aimed at year 9 children (but would be suitable for able year 8 children, or for foundation skills in GCSE). This resource includes an editable and printable A4 work booklet (word format) and 7 editable PowerPoints, including within all theory needed, and home learning too. Alongside this are accompanying files for laser cutting the joint tags, and a 2D design file of each joint drawn up in isometric and rendered. You will need to install the font ‘Drafting’ (free download from dafont) Materials needed: 1.2mm sheet aluminium Recycled pallet wood for the backing boards, 3mm MDF for the name tags, 1mm sheet steel 15mm steel tube Recycled aluminium for the sand casting 15mm pine for all wooden joints. Screws / brass and glue as needed. All is sourced from K&M Wholesale. Outcomes are great, and there is significant learning throughout.

Powerpoint for use during options process - fully editable, and included within is the freely available DATA video on “What is Design & Technology?” Presentation focuses on skills and jobs.

18 slide powerpoint covering all the required information about smart materials and modern materials needed for AQA Design & Technology. Powerpoint includes a maths starter and connect activity. There is also two exam style questions for consolidation and home learning. Powerpoint covers all the needed theory, and has a wide variety of images, gifs and videos too.

A series of 5 worksheets walking you through various drawing techniques. Cross Hatching & Tonal Range One Point Perspective Rendering a Toaster Rendering Shapes Two Point Perspective

An editable (using powerpoint) or printable template for whole school SWOT analysis. Sheet includes prompts.

Powerpoint designed to support the teaching of Inclusive Design 21 slides including starter/consolidation tasks along with a case study summarising exercise.

11 Slide powerpoint covering the necessary elements of theory for AQA GCSE Design & Technology. Lesson has a starter question. Main focus of lesson is a production line activity manufacturing a small laser cut slot together rocket as a class, then packaging in a carton. All CAD files (2D design) are enclosed to make up the parts.

A 17 slide powerpoint covering material testing in readiness for NEA. This focusses on testing techniques you can easily do in school (tensile, hardness, toughness, energy (heat) transfer etc. Within the powerpoint are photographs and videos of each test taking place in the workshop (they are made by me - not just a youtube video). The theory works as a standalone presentation, but if you wanted to make your own testing rigs, I have made a few simple contraptions to make testing more controlled which are also shown in the powerpoint photos/videos in use - all 3 would be easy to make in any DT workshop in a few hours. There is an accompanying handout for recording any practical tests that students do. Always one of the favourite lessons of year 10, and they get to complete a piece of NEA in the process too! As with all my lessons, they come with a key question to begin and relevant exam questions (with mark scheme) to conclude.

A 17 slide PowerPoint, running through the needed knowledge for AQA A-level D&T. This covers the types of composites, along with examples of each. Several curated youtube videos are also included to bring the theory to life.

A microsoft office (powerpoint) based growth plan and development plan. Both are fully editable, and will print at A3 or A4 as desired. Growth Plan: Designed as a 3 year vision, around the idea of tree growth, along with foundations of leadership. I have left a gap for a diagram of purpose from your school with a filler image - circular ones work well here. Development Plan: Table based development plan, over 2 sides. One side for depth, and the second side for a light overview. This focus is on leaves (as in on the growth tree!). Please note I have put most of the graphics on the slide master (view - slide master) to prevent less ICT aware people messing everything up when completed as a group!

A 7 lesson module of work suitable for both ICT and D&T. Primarily Year 7 and 8 (but could go a year further in either direction with minor changes). Resource comes with full scheme of learning (with week by week lesson plans within), weekly PowerPoints, with youtube clips to stimulate. Suggested software to accompany is ‘Monkey Jam’ - freeware, but equally will work well on the many free apps on phones and tablets. Work booklet is a PowerPoint, which I usually host on Microsoft Teams, with every child having their own. The project is mostly paperless, apart from the peer review sheets for evaluative purposes. Loved by children, and great to insert the finished clips into assemblies etc fr subject promotion.

A modern take on a classic woodwork project, creating a laminated curved lid pine box. This is a sequence of 7 lessons, each 2 hours long, with full powerpoint to accompany all learning. The lessons have a work booklet to complete, and also a modified version for SEND students. All resources are FULLY EDITABLE, in word or powerpoint format. You will need to install the font ‘Drafting’ (free download from dafont) There are extra step by step guide sheets to help too. Materials needed: 2 of 210mm x 70mm x 15mm pine, flexi/aero/bendy ply sheet and some thin normal ply. Outcomes are great, and there is significant learning throughout.

11 Slide powerpoint covering the necessary elements of theory for AQA GCSE Design & Technology. Lesson has a starter question, and further questions as a consolidate.

8 Slide powerpoint covering the necessary elements of theory for AQA GCSE Design & Technology. Lesson has a starter question. The lesson also includes a practical activity investigating some fittings (you can make up some demos if desired - photos enclosed, and a CAD file for 3D printing some feet for an M8 bolt)

A 17 slide PowerPoint addressing the product life cycle: introduction - growth - maturity - decline. The presentation includes case studies, connect activity and consolidation exam questions with a student facing mark structure.

Double sided A4 which works in conjunction with ANY of the Richard Hammond Engineering Connections video (they are all on YouTube and last around 45 minutes). This handout encourages note making (mind map style) during the video, then guides students through first some concept designs and then a final design whereby they must apply the engineering principles covered in the film. Great for a longer cover lesson with a non specialist.

A worksheet based on a Lego Mini Build of a D&T Workshop. Children are tasked with drawing up the photographed model in isometric. At the top of the page I have modeled this task in simple steps. To draw, use thick/thin lines, and then render the models should take around an hour per sheet. File enclosed is a printable PDF and accompanying jpeg. I have other sheets available in this series, or a compilation package too.