Identifying the ways in which water can be hazardous to human health This activity focuses on the link between water and health. It encourages students to think about the role of engineers in providing us with healthy water supplies and waste-water disposal systems by exploring the different ways in which water can be hazardous (and even fatal) to human health. It’s one of a set of resources developed to aid the teaching of the secondary national curriculum, particularly KS3, supporting the teaching in science. The lesson can be accompanied by the Water pollution and Spreading disease activities. **Activity: Identifying the ways in which water can be hazardous to human **health This activity gives students a quick, engaging introduction to the very real dangers of unclean water. It begins with students viewing our DHMO hazard statement presentation, which playfully lists various dangerous properties of…water! Once students realise that DHMO is simply water, they will view our Safe Drinking Water video which reinforces the very real dangers of water. Students then work in groups to analyse different ways water poses a risk to human health, and the class compiles a list of these hazards for further discussion. Students can also complete our World water quiz worksheet. Download our activity overview for a detailed lesson plan on the dangers of unclean water. The engineering context Engineers play a vital role in making sure that our water is safe to drink. Water is crucial to human life, but it can also be a killer. Drinking or cooking water contaminated with micro-organisms or chemicals is a leading cause of disease and death across the world. Poor facilities for the disposal of sewage and other waste water can quickly lead to the spread of dangerous diseases. Lack of efficient drainage systems and flood defences can lead to catastrophic flooding, as has been seen in several different areas of the world in the past few years. Suggested learning outcomes Once this lesson is complete students will understand that unclean water is the world’s number one killer. They’ll be able to explain that clean water supplies and effective methods of waste-water disposal are essential for human health as well as be able to state the chemical properties of water. Download our activity sheet and other teaching resources The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. All activity sheets and supporting resources are free to download (including video clips!), and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. Download our classroom lesson plan and presentation below. Please do share your highlights with us @IETeducation.

Producing a CAD drawing of a design idea This activity involves using CAD to design a modular product that could be made in batches using the casting process. Students will be tasked with creating a mould that could be used to make this product. The aim of this activity is to design a shape that can be tessellated, have a practical application, and would look aesthetically pleasing as a modular set of products that can lock together. This project is part of a series of resources designed to challenge the students by requiring them to apply the knowledge and understanding of engineering materials through a ‘batch’ production experience. This activity should be followed by Investigating batch production . Also included in the series are Engineering design processes and Investigating cast products. It’s one of a set of resources developed to aid the teaching of the secondary national curriculum, particularly KS3, supporting the teaching in engineering and design and technology (D&T). Activity: Producing a CAD drawing of a design idea In this activity students will design a modular product that could be made in batches using the casting process and create a mould that could be used to make this product. Students will be asked to design a set of identical products that interlock (are modular). The products must be suitable for batch production made by casting and be made from PoP (plaster of Paris). They’ll need to produce sketches of some design ideas and then choose one for modelling using CAD software. Students will next create a card model to test the interlocking feature and aesthetics of their design. After this they can make any necessary adjustments to their CAD drawing, and use use CAD/CAM to create an MDF mould. The engineering context Engineers will use CAD design as part of the process of making products. Items that have been designed this way are also ideal for batch production as they can be easily replicated. This links to industrial practices such as quality control, standardisation, and casting manufacture. Suggested learning outcomes This activity will teach students to analyse a design brief as well as generate ideas for a tessellated product that is suitable for batch manufacture. Students will also learn how to produce a CAD drawing of a design idea. Download our activity sheet and other teaching resources The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. Please do share your highlights with us @IETeducation

Using the casting process to make a batch of a product In this activity students will use the casting process to create a small batch of identical products. The lesson is part of a series of resources designed to challenge students by requiring them to apply the knowledge and understanding of engineering materials through a ‘batch’ production experience. It followed on from our CAD design project . Also included in the series are Engineering design processes and Investigating cast products. It’s one of a set of resources developed to aid the teaching of the secondary national curriculum, particularly KS3, supporting the teaching in engineering and design and technology (D&T). Activity: Using the casting process to make a batch of a product In this activity, students will use a prepared mould to create a small batch of identical products through a casting process. Students will mix the casting material (like plaster of Paris), pour it into the moulds, and allow the products to dry. Once complete, they will then carefully remove the products from the moulds. Students will need to record the dimensions of each product to identify any variations and explain why these might have occurred… Download our activity overview for a detailed lesson plan on batch production. The engineering context Casting is a commonly used by engineers as a form of batch production, which is way of manufacturing many different forms of goods in an efficient way on a large-scale offering benefit such as mass production and quality control. Suggested learning outcomes This lesson will teach students how to carry out a basic batch manufacture of a cast product. At the end of the activity, students will be able to describe the advantages of batch production. Download our activity sheet and other teaching resources The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. Please do share your highlights with us @IETeducation.

What affects the properties of the material in a cast product? In this activity students will explore how changing the ratio of PVA glue to PoP (plaster of Paris) affects the strength of a composite material. They’ll test both tensile and compression strength to find the perfect mix. This activity is part of a series of resources designed to challenge the students by requiring them to apply the knowledge and understanding of engineering materials through a ‘batch’ production experience, including CAD design project , Investigating batch production, and Engineering design processes. It’s one of a set of resources developed to aid the teaching of the secondary national curriculum, particularly KS3, supporting the teaching in engineering and design and technology (D&T). Activity: What affects the properties of the material in a cast product? In this activity students will investigate how the proportion of PVA glue added to plaster of Paris (PoP) affects the properties of the material produced in a cast product. Students will work in pairs to create card moulds. They will then mix different ratios of PVA, PoP, and water, pouring each mixture into duplicate moulds. After the test strips dry overnight, they’ll conduct two types of strength tests: a tensile test (hanging weights) and a compression test (using a G-clamp). They’ll then be tasked with analysing the results to determine how PVA affects the material’s strength. Look for patterns and identify the optimal ratio of PVA to PoP. Finally, decide on the best ratio for your future casting projects and present your findings to the class, using graphs or tables to support your conclusions. Download our activity overview for a detailed lesson plan on CAD design. The engineering context As part of the production process, engineers and designers must test the properties of different materials in order to select the best materials for their products to ensure that they’re suitable (e.g., are they strong enough for the activity that they’ll be used for?). Suggested learning outcomes Students will be able to explain how to develop a product or material to improve the outcome (engineering materials). They’ll also learn how to set up an experiment that allows key decisions to be made from the outcome. Finally, they’ll be able to carry out a manufacturing and testing programme, understanding the importance of time allowance and quality control. Download our activity sheet and other teaching resources The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. Please do share your highlights with us @IETeducation.

Using the circumference formula and estimation to design an efficient revolving door This lesson tasks students with designing a functional and efficient revolving door. It tests practical maths skills such as estimation and calculating the circumference of a circle, while also challenging students with a fun design activity. It’s one of a set of resources developed to aid the teaching of the secondary national curriculum, particularly KS3, supporting the teaching in maths. Activity: Using the circumference formula and estimation to design an efficient revolving door In this activity students will examine the design of revolving doors for maximum efficiency both in terms of reducing space and minimising heat loss. They’ll firstly be tasked with calculating the idea entrance/exit arc length based on the door’s diameter. They’ll then be asked to estimate how many people can fit into each door section and how this will impact getting 200 people in and out of the building as the arrive and leave for work. The GeoGebra file Revolving doors allows teachers to demonstrate the problem and check the solution to the first task. Download our activity overview and Revolving door presentation for a detailed lesson plan on the maths behind designing a revolving door. The engineering context Revolving doors are energy efficient as they prevent drafts (via acting as an airlock), thus preventing increases in the heating or cooling required for the building. At the same time, revolving doors allow large numbers of people to pass in and out. As such, architects and engineers need to apply mathematics to their designs, which can help to determine how they will work in practice and whether or not they’re fit for purpose. Suggested learning outcomes Students will learn how mathematical concepts like circumference and arc length are applied to solving real-world design problems. Download our activity sheet and other teaching resources The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. Download our classroom lesson plan and presentation for free! Please do share your highlights with us @IETeducation.

With our design and technology KS3 teaching resource lesson plan and template, learners will create a visual answer to a design situation using both sketching and CAD drawing software, followed by 3D printing a physical model. This is one of a set of teaching resources designed to allow learners to use practical methods to support the delivery of key topics within Design & Technology and Engineering. This activity is based on CAD and 3D printing and provides a straightforward, practical way to introduce these technologies into the curriculum. This activity could be used as a main lesson activity to reinforce CAD drawing skills or to introduce 3D printing. It could also be used as part of a scheme of work learning about the design process. Activity: Learners will decide upon a building to create and its purpose before sketching three draft ideas. They will then select the best features of their ideas before drawing a final design idea. Learners can share their ideas and concepts with peers for constructive feedback and improvement of designs. Once their designs have been finalised they will use Onshape to produce CAD models of their buildings and then 3D print them to create a town including the work of the whole class. Tools/supplies needed: Pencils Computer access with 3D drawing package (Onshape, Tinkercad, Fusion 360, Solidworks etc) 3D Printer and filament The engineering context CAD is a versatile tool used by engineers across various disciplines to conceptualise, design, analyse, and document complex systems and structures. For example, engineers use CAD to design cars and buildings and to carry out virtual testing of aircraft wings. 3D printing in engineering facilitates rapid prototyping, customisation, and the production of complex geometries while reducing material waste and enabling on-demand production. Suggested learning outcomes This resource combines design and technology with engineering with the aim that the learners will be able to communicate a design, develop design skills using the Onshape CAD software and be able to 3D print a design idea successfully. Download our activity sheet and other teaching resources All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. Please do share your highlights with us @IETeducation

In this fun STEM teaching resource learners will discover how to create a 3D model of a basic shape in TinkerCAD and then print it using a 3D printer. We’ve created this classroom design activity to support the delivery of key topics within design & technology (D&T) and engineering. This teaching resource activity is based on 3D printing and provides a straightforward, practical way to introduce this technology into the curriculum. This activity introduces the concept of 3D CAD design and some of the basic tools used with CAD software. The software used for the CAD activity is the free and widely used TinkerCAD; however, this could easily be substituted for any other 3D CAD software already available in school. The activity involves designing a basic shaped cookie cutter, then printing it out using a 3D printer. The guidance given for the printer is generic and may need to be varied depending upon the specific model(s) available in school. This could be used as a main lesson activity to introduce basic CAD drawing skills or 3D printing. It could also be used as the basis for an integrated scheme of work, where learners subsequently use their cookie cutters to make biscuits, allowing integration with maths (measuring out ingredients) and food technology skills. Tools/supplies needed: Computer with TinkerCAD 3D Printer PLA filament of an appropriate diameter for the equipment available Optional (for starter): examples of plastic cookie cutters Follow our step-by-step guide on how to design and make a cookie cutter Learners will design and make a cookie cutter using CAD and 3D printing. The engineering context CAD is a versatile tool used by engineers across various disciplines to conceptualise, design, analyse, and document complex systems and structures. For example, engineers use CAD to design cars and buildings and to carry out virtual testing of aircraft wings. 3D printing is an area of huge growth, with applications ranging from small plastic parts to printing metal bridges in place over rivers! Suggested learning outcomes This resource combines design and technology with engineering with the aim that the learners will be able to develop skills in CAD and be able to 3D print a design idea successfully. Download our activity sheet and other teaching resources All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. Please do share your highlights with us @IETeducation.

In this activity students will design a prototype for a casing and housing a food temperature probe. The activity can be used as a follow-on activity from our Micro:bit food temperature probe design project. It’s part of a series of resources which support the use of the BBC micro:bit in design and technology (DT) or computing lessons. Activity: Designing the casing for a food temperature probe This activity tasks students with turning a BBC micro:bit food temperature probe into a finished product. Students will need to consider aesthetics and ergonomics, how it can securely enclose and fit the food temperature probe, and also which materials should be used that are fit for purposes. Students will sketch their casing ideas, adding notes explaining their design choices. Students can also create a prototype of their design using modelling materials (e.g., card). Download our activity overview for a detailed lesson plan on product integration. The engineering context Integrating programmable systems within products is an important part of the design process when working with electronic products and systems. Not only does the system have to function correctly, the finished product also has to be commercially viable in the sense that it must be cost-efficient to manufacture, and attractive enough for potential customers to want to buy. Suggested learning outcomes By the end of this lesson, students will be able to develop a design for a fully integrated electronic product. They’ll also be able to annotate their ideas using technical language. Download our activity sheet and other teaching resources The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. Download our classroom lesson plan and presentation below. Please do share your highlights with us @IETeducation

In this activity students will use case studies to investigate how architectural and building issues can be resolved. It can accompany our Structural engineering starter and How to design a spaghetti roof structure activities as part of a series of activities that explores structural engineering. This is one of a set of resources developed to aid the class teaching of the secondary national curriculum, particularly KS3. It has been designed to support the delivery of key topics within design and technology (D&T) and engineering. Activity: Exploring how architectural and building issues can be resolved through real-life case studies Students will view the design of the O2 arena by watching our Sound design video. They will also investigate the design of Stanstead Airport by viewing our structural engineering presentation. They will look specifically at the requirements of the buildings and the constraints in terms of structural design. They will also explore the design solutions used to overcome potential issues. This will form the stimulus for students to investigate structures in detail. The students will then be asked to explore possible solutions to a given structural design challenges. Download our activity overview for a detailed lesson plan on structural engineering for free! The engineering context Iconic structures don’t just happen by accident. When designing large buildings, there will often be challenges that need problem solving such as eliminating columns for large open spaces. Engineers need structural knowledge to be able to create innovative designs that are safe, functional, and aesthetic. Suggested learning outcomes Students will learn how to identify the key features of structural components. They’ll also know how to identify the various pressures a structural element can undergo and then apply their knowledge of structure to design an effective solution to overcome specific issues. Download our activity sheet and other teaching resources The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. All activity sheets and supporting resources are free to download (including the video), and all the documents are fully editable, so you can tailor them to your class’s and your schools’ needs. You can download our classroom lesson plan below. Please do share your highlights with us @IETeducation.

Assessing the probability of a particular situation occurring in a power station In this lesson students will use event tree analysis to roleplay an exercise where they quantify the risk of safety systems failing in a power station. This is one of a set of resources developed to aid the class teaching of the secondary national curriculum, particularly KS3. It has been designed to support the delivery of key topics within mathematics. In this activity, students will roleplay the following scenario: ‘A power station experiences a loss of coolant to its reactor about once per year. To prevent a dangerous explosion, a set of controls are in place. Firstly, an alarm which alerts the operator, this works on 99% of occasions. If this does fail various other systems will become operational to monitor the issue and prevent disaster.’ Using the examples in our Power station event analysis handout and Event analysis presentation, students will learn how event tree analysis can be used to model the probability of the risk of safety systems failing. Students can also use our Event analysis simulator tree spreadsheet to run simulations to check their workings. Download our activity overview for a detailed lesson plan (including answers) for teaching students about event tree analysis. The engineering context Event trees allow engineers to visualise the chain of events that could lead to system failures. Analysing the probabilities of these events helps them understand the likelihood of various outcomes as part of their efforts to design measures that can help to mitigate risks. Suggested learning outcomes In this lesson, students will learn about frequency trees, probability, and relative frequency. Download our activity sheet and other teaching resources The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. All activity sheets and supporting resources are free to download (including the video), and all the documents are fully editable, so you can tailor them to your class’s and your schools’ needs. You can download our classroom lesson plan for free! Please do share your highlights with us @IETeducation.

Analyse an existing personal alarm system This is one of a series of resources to support the use of the BBC micro:bit in Design and Technology lessons. Schools are busy environments and it is easy for learner’s bags to be left unattended, taken by mistake or even stolen. Alarm systems using embedded electronics and programmable components can be developed to protect the property of learners during the school day. In this unit of learning, learners will research, program and develop a working school bag alarm system using the BBC micro:bit. Activity info, teachers’ notes and curriculum links In this activity, learners will carry out an analysis of an existing, commercially available personal alarm system. The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. Download the free activity sheet! All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your students’ and your schools’ needs. And please do share your classroom learning highlights with us @IETeducation

In this activity students will learn about hypotheses by looking at heart rate data and how the use of computer games affects fitness. This lesson follows our Wii Fitness activity, which provides students with an opportunity to collect fitness data which they can use as evidence to debate whether people should be encouraged to engage in computer-based sport activities. This is one of a set of resources developed to aid the class teaching of the secondary national curriculum, particularly KS3. It has been designed to support the delivery of key topics within mathematics and science. Activity: Making hypotheses on how the use of computer games affects fitness In this activity students will review their results from our Wii Fitness investigation to form a hypothesis on how different activities affect heart rates. Students must consider the validity and size of the data set collected and work through a series of questions to explore if the data is sufficient to confirm their initial hypotheses. Download our activity overview for a starter lesson plan on hypotheses for free! The engineering context Engineering often involves problem-solving, and hypothesis based on initial observations can help engineers quickly define the potential cause of a problem. Hypothesis helps engineers to interpret data and can even guide them towards designing tests to make sure that the correct data is being gathered. This systematic approach can help to quickly validate or refute hypothesis, allowing engineers to find the right solution for the problem at hand. Suggested learning outcomes Students will be introduced to hypotheses and know how to create one from using a data set. They’ll also be able to evaluate the suitability and validity of the data collected as well as explain how results and ideas can be changed when we consider other variables. Download our activity sheet and other teaching resources The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. All activity sheets and supporting resources are free to download (including the video), and all the documents are fully editable, so you can tailor them to your class’s and your schools’ needs. You can download our classroom lesson plan below. Please do share your highlights with us @IETeducation.

In this activity students will investigate the design of roofs in terms of purpose and structure. This activities accompanies our Structural engineering and How to design a spaghetti roof structure resources as part of a series of activities that explores structural engineering. The lesson has been designed to either reinforce or extend basic knowledge of structures to students by providing a real-life context. It is not intended to form an introduction to structures. This is one of a set of resources developed to aid the class teaching of the secondary national curriculum, particularly KS3. It has been designed to support the delivery of key topics within design and technology (D&T) and engineering. Activity: Looking at the style and purpose of different roofs This activity will introduce students to basic structural concepts by looking at the familiar context of roofs. Students will start by viewing our Structural engineering starter presentation to discuss the purpose and different styles of roofs. They will next consider how their own roof might be structured. They will then be introduced to key terms relating to structural engineering such as tension, compression, structs and ties to give them context for subsequent engineering activities. By working through our presentation, students will be asked to identify which structural members are in tension and compression. Download our activity overview for a starter lesson plan on structural engineering for free! The engineering context Ingenious structural engineering has been responsible for many impressive roofs such as the O2 Arena, Stanstead Airport or Beijing National Stadium. Understanding roofs can be a gateway to appreciating the ingenuity behind larger structures like bridges, skyscrapers, and other structures that form our built environment. Suggested learning outcomes At the end of this lesson students will be able to identify the key features of a structural component. They’ll also know how to identify the various pressures a structural element can undergo. They will be able to apply their knowledge of structures to a given problem in order to design an effective solution. Download our activity sheet and other teaching resources The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. All activity sheets and supporting resources are free to download (including the video), and all the documents are fully editable, so you can tailor them to your class’s and your schools’ needs. You can download our classroom lesson plan for free! Please do share your highlights with us @IETeducation.

In this hands-on activity students are challenged with designing and engineering a spaghetti roof structure. It should follow our Structural engineering starter and Structural engineering as part of a series of activities that explores structural engineering. The lesson has been designed to either reinforce or extend a leaner’s basic knowledge of structures by providing a real-life context. It is not intended to form an introduction to structures. This is one of a set of resources developed to aid the class teaching of the secondary national curriculum, particularly KS3. It has been designed to support the delivery of key topics within design and technology (D&T) and engineering. Activity: Designing and engineering a spaghetti roof structure In this fun activity, students will explore structural engineering principles by designing and building a strong, lightweight roof structure using spaghetti. The challenge comes from having to use the smallest amount of spaghetti and glue possible to keep the structure light and strong. One their spaghetti roof is built, students must identify which areas are in tension and which are in compression so that they decide which parts of their structure need strengthening. Download our activity overview for a detailed lesson plan on structural engineering and how to design a roof structure for free! The engineering context Virtually every building needs a roof. Sometime the function of the room can be simple, it just needs to be strong and light so that it doesn’t fall down. Other times, more ergonomic considerations need to be taken into consideration such as weatherproofing, aesthetics, acoustics, insulation and fire resistance. Civil engineers must also be able to identify areas of tension and compression in existing structures, such as older buildings or in buildings that are having renovation work done, in order to be able to make recommendations for that will strengthen and support the existing structure. Suggested learning outcomes This lesson will teach students how to identify the key features of a structural component. They’ll learn how to identify the various pressures that a structural element can undergo and also be able to apply their knowledge to create solutions to given problems. Download our activity sheet and other teaching resources The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. All activity sheets and supporting resources are free to download (including the video), and all the documents are fully editable, so you can tailor them to your class’s and your schools’ needs. You can download our classroom lesson plan for free! Please do share your highlights with us @IETeducation.

Promoting a product to a particular target user group This marketing lesson revolves around designing, branding, and marketing a new Nintendo Wii product. Students will be tasked with promoting a product to a particular user group, honing in on teamwork, creativity, and entrepreneurial skills. Make your pitch’ will provide students with an opportunity to explore and understand their chosen user group in detail through the analysis of a series of audio pitches. This is one of a set of resources developed to aid the class teaching of the secondary national curriculum, particularly KS3. It has been designed to support the delivery of key topics within design and technology (DT). Activity: Promoting a product to a particular target user group The activity consists of defining what a pitch is and analysing three radio adverts (pitches) attached in the Audio Radio Pitch (Presentation). The class will identify the unique selling point of the product, the specific user group targeted, and whether they believe the advert is successful, giving reasons for their opinion. Before proceeding to slide 3 of presentation, students will be asked, “What makes an effective pitch?” They will compile a list based on their evaluations of the three radio audio clips. Slide 2 will then be shown for comparison. The engineering context From designing a new video game console or inventing an innovative piece of tech, this activity will show students how understanding user needs and preferences is crucial in creating products that people want to buy. This lesson will also highlight the importance of effective communication in the form of product pitches. Suggested learning outcomes By the end of this lesson, students should be able to explain why it is crucial to understand what a user wants when designing and marketing a product. They should also be able to define what a ‘pitch’ is and design a ‘pitch’ aimed at a specific user group or client. This understanding will empower them not only to create effective marketing strategies but also to appreciate the importance of user-focused design in product development. Download our activity sheet for free! The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. All activity sheets and supporting resources are free to download (including the video), and all the documents are fully editable, so you can tailor them to your class’s and your schools’ needs. Please do share your highlights with us @IETeducation.

Calculate the cross-sectional areas of different aqueducts to determine which is most effective In this STEM activity students will investigate different aqueduct shapes to determine which is the most efficient design. This is one of a set of resources developed to aid the class teaching of the secondary national curriculum, particularly KS3. It has been designed to support the delivery of key topics within mathematics and engineering. Activity: Calculating the cross-sectional areas of different aqueducts In this lesson, students must calculate the cross-sectional area of various aqueducts to determine which one is most effective in terms of least water lost via evaporation. Using our Aqueduct presentation, learners will be introduced to the engineering behind aqueducts by estimating the volume of water follow through the aqueduct in one second. Students will then calculate the cross-sectional areas of various aqueduct shapes, including rectangles and trapezoids. To do this, learners must apply their understanding trigonometry to find the missing side lengths. Alternatively, students can use this GeoGebra file to calculate the area of the trapezium. Download our activity overview for an introductory lesson plan on trigonometry for free! The engineering context Aqueducts are constructed to carry water across gaps such as valleys or ravines. In modern engineering, the term aqueduct is used for any system of pipes, ditches, canals, tunnels, and other structures used for this purpose. Aqueducts can be used to enable water to be transported to areas where it is in short supply. Suggested learning outcomes In this activity students will apply their knowledge of mathematics such as calculating the area of a rectangle and trapezium or the volume of a cuboid. They will also be able to specifically apply their knowledge of trigonometry. Finally, they’ll learn how to plot graphs using a table of values. Download our activity sheet and other teaching resources The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your class’s and your schools’ needs. You can download our classroom lesson plan for free!

Calculating the angles and lengths of components in a water wheel In this starter activity students will use a water wheel model to determine various angles and lengths. This is one of a set of resources developed to aid the class teaching of the secondary national curriculum, particularly KS3. It has been designed to support the delivery of key topics within mathematics and engineering. Activity: Calculating the angles and lengths of components in a water wheel Students will review our presentation, which explains the structure of a water wheel. Students are tasked with calculating the central angle of the water wheeling by diving 360 degrees by the number of equally spaced spokes. Learners must then find the size of a specified angle and two sides of a shape by identifying familiar shapes within our water wheel diagram (e.g., a type of triangle). Students can approach this in more than one way, using either trigonometry or by sketching a scale drawing. After the lesson is complete, there can be a class discussion on the accuracy and usefulness of both methods. Download our activity overview for an introductory lesson plan on calculating angles and lengths in a water wheel for free. The engineering context Mathematical modelling is often used in manufacturing, construction, and civil engineering, where mathematical shapes and principles are used by engineers to inform design specifications, architectural drawings, and design schematics. Suggested learning outcomes In this activity students will learn about the angle properties of a regular polygon and an isosceles triangle. Learners will use the knowledge of trigonometry to find the length of a side and also be able to draw a scale diagram of a triangle for the purposes of construction. Download our activity sheet and other teaching resources The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your class’s and your schools’ needs. You can download our classroom lesson plan for free! Please do share your highlights with us @IETeducation

Learning about how wireless technology can used for personal health care In this activity students will discover how wireless electronic systems can be used to improve health care. This topic investigates the driving technology behind body centric communications. Students will explore current health applications of wireless health care devices and learn about the possibilities for the future as well as the ethical issues surrounding these advancements. This is one of a set of resources developed to aid the class teaching of the secondary national curriculum, particularly KS3. It has been designed to support the delivery of key topics within design and technology (DT) and science. Activity: Learning about how wireless technology can used for personal health care Students will firstly work through our Pacemaker case study, where they must explain why someone with a pacemaker needs to be cautious around certain sources of radiofrequency energy. They will then draw a labelled diagram of a heart, pacemaker, and connecting wire (BCA), with annotations explaining how the pacemaker helps with heart problems. Students will then review our Body Centric Antenna (BCA) case study where a BCA increases the speed at which data can be made available to health professionals. After reading the case study, students must produce then a short leaflet that explains the potential health benefits of BCAs. Download our activity overview for an introductory lesson plan on wearable healthcare technology for free! The engineering context Body centric communications have abundant applications in personal healthcare, smart homes, personal entertainment, identification systems, space exploration and the military. Suggested learning outcomes By the end of this activity students will understand that an electronic decision-making system consists of an input, a processor, and an output. They will also know that changes in physical factors will result in an energy transfer in a transducer (i.e., a transducer can be used as a sensor). Finally, they will be introduced to some of the social uses of electronic systems in health care. Download our activity sheet and other teaching resources The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your class’s and your schools’ needs. You can download our classroom lesson plan for free! Please do share your highlights with us @IETeducation

Understand the importance of clear instructions when developing a program In this starter activity, students are introduced to what is meant by a program through our fun maze route activity. For the purposes of this activity a program is a set of step-by-step instructions that must be followed. Learners will therefore be asked to create a set of instructions that will solve a problem. This is one of a set of resources developed to aid the class teaching of the secondary national curriculum, particularly KS3. It has been designed to support the delivery of key topics within design and technology (DT). Activity: Understanding the importance of clear instructions when developing a program In this activity students will complete a practical activity that will help them to understand what programme is. Learners will get into pairs and, with one person having to navigate their (blindfolded) partner through a simple maze by giving them verbal instructions. After this activity, there will be a class discussion on the importance of clear and concise instructions. Students will then reflect on what a programmable system is (i.e., a set of instructions) and discuss how this links to the activity that they’ve just completed. Download our activity overview for an introductory lesson on programmes for free! The engineering context Programming is an essential skill in the 21st century world. From mobile phones and tablet computers to large passenger aircrafts, our everyday lives are shaped by systems that have been programmed. These systems keep us safe, get us to work/school or allow us to communicate with our friends and family. Suggested learning outcomes By the end of this lesson students will learn that a program is simply a set of step-by-step instructions. They will also understand the importance clear instructions when developing a program. Download our activity sheet and other teaching resources The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. All activity sheets and supporting resources are free to download, and all the documents are fully editable, so you can tailor them to your class’s and your schools’ needs. You can download our classroom lesson plan for free! Please do share your highlights with us @IETeducation

Solving transportation issues around the world In this activity students will use what they know about community transport systems to suggest possible solutions to existing transportation problems. This is one of a set of resources developed to aid the class teaching of the secondary national curriculum, particularly KS3. It has been designed to support the delivery of key topics within design and technology (D&T) and engineering. Activity: Solving transportation issues around the world Students will watch our short film on transportation planning, which will be the basis for a class discussion on the potential issues that come with holding major events in cities such as the Olympic Games. Students will then work in teams to review a scenario from our Solving the transport problem worksheet, which includes various transport planning scenarios. Each team will choose a problem to solve and then present their solution to the class. Finally, students will examine the negative consequences that inevitably come with improving community transport, considering environmental and social factors. Download our activity overview for an introductory lesson plan on transportation issues for free! The engineering context Engineers must often solve transportation problems that can arise in big cities. Whether it’s designing traffic flow for megacities, building accessible infrastructure for rural areas, or integrating sustainable fuels, transportation planning equips engineers to tackle hazards, congestion, isolation, and inefficiency. Suggested learning outcomes This activity teaches students how to use community transport to solve social and environmental problems. It will also teach them how to explain the rationale behind these decisions. Download our activity sheet and other teaching resources The activity sheet includes teachers’ notes, useful web links, and links (where appropriate) to the national curriculum in each of the four devolved nations; England, Northern Ireland, Scotland and Wales. All activity sheets and supporting resources are free to download (including the video), and all the documents are fully editable, so you can tailor them to your class’s and your schools’ needs. You can download our classroom lesson plan for free! Please do share your highlights with us @IETeducation